Zemax EE Software and Programming Dissertation Example | Topics and Well Written Essays - 2750 words

Zemax EE Software and Programming - Dissertation ExampleAside from study properties such as reflection coefficient, absorption coefficient, temperature variation, and thermal conductivity, additional theoretical estimations are made. An example is the determination of focal length, exposed effective areas, and vigilant altogetherurement and concentration for all components. A number of designs are evaluated to examine the effect of different geometrical shapes of light pipes for refraction studies and light cups for reflection studies. Zemax software is utilise for a large part of this study. Therefore, this chapter details the basics of Zemax software for optic design and ray tracing. Software programs for lens design and optical studies have been of enormous utility in the field of optics. Their advent has substantially simplified and enhanced our understanding of optical design and analysis. As stated by Winston, Minano, and Benitez (2005), The design of visualise optical systems is a classic ?eld of research that has achieved a high level of development. There are on the market optical design programs that license the numerical optimization of the design parameters, allowing us to obtain results that were unattainable with the analytical tools used before the development of computers (p. 219). Software programs are based on a number of optical principles, such as geometrical optics and ray tracing that function according to the basic rectitudes of optics. The following sections discuss these basic principles along with an psychiatric hospital to Zemax software that is used in this study. 4.2. Ray Tracing Programs and Geometrical Optics The basic tool required in designing any imaging or non-imaging optical system is geometrical optics (Winston, Minano, & Benitez, 2005). Geometrical optics is based on the universal laws of reflection, refraction, and transmission of light. The incident light on a reflective turn out and the reflected light from th at surface always make equal angles to the normal, and they lie on the same plane. In case of transmitted light, the direction of the refracted and transmitted ray changes according to Snells law of refraction, according to which the sine of the angle between the incident ray and the normal is in constant ratio with the sine of the angle between the refracted ray and the normal, with all three being coplanar (Winston, Minano, & Benitez). Based on these universal laws of light, the behavior of a light ray in any optical system rouse be predicted. Simple optical systems can be predicted manually, but complex ones require sophisticated computer programs that can easily predict the behavior of light through and through computerized ray tracing. Even the analysis and design of solar concentrators requires such a program. Ray tracing is the process of constructing or following the paths of light rays through an optical system consisting of refracting and reflecting surfaces (Winston, Min ano, & Benitez, 2005). For instance, the transmission of a specific concentrator can be determined through ray tracing as follows N rays enter a concentrators aperture at a ? angle of incidence at the entry aperture of the concentrator, as shown in Figure 4.1. Fig. 4.1 Ray tracing of the rays transmitted through a concentrator to determine transmission (Winston, Minano, & Benitez, 2005). After the rays are traced through the optical system, N rays appear from the concentrators exit aperture. The dimensions of the exit aperture are determined based on the required concentration ratio of the system. The remaining N and N rays are lost through various processes such as ray scattering. The transmission strength of the system for a different angle of incidence